FOSSIL´S GRAVITY 250-22 (KIT)

FOSSIL´S GRAVITY 250-22 (KIT)
FOSSIL´S GRAVITY 250-22 (KIT) FOSSIL´S GRAVITY 250-22 (KIT) FOSSIL´S GRAVITY 250-22 (KIT) FOSSIL´S GRAVITY 250-22 (KIT) FOSSIL´S GRAVITY 250-22 (KIT) FOSSIL´S GRAVITY 250-22 (KIT)
Marca: FOSSILSTUFF
Código do produto: FSGRAVITY 250-22
Disponibilidade: Em stock
Preço: 99,00 €
Opções disponíveis

* CÔR:




  Qtd:  Comprar
   - OU -   
  

The Gravity 250-22 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
The Gravity has been designed around specific components to keep the frame as low as possible. Recommended components are as follows: 

  • Naze 32 Rev 5 with horizontally soldered header pins
  • 2200 series motors with 5” props
  • DYS BLHeli 16 amp ESC’s or similar
  • CC3D Power Distribution Board or similar
  • Skyzone TS5823 VTX

 
Other components can be used but Fossils Stuff cannot guarantee they will fit without possible modification to the Mainframe or Top Cover.
 
Main Features:

  • FPV camera protection
  • Motor protection
  • Accessible VTX dip switches from window in Top Cover
  • Lipo balance lead socket
  • Battery strap slots
  • Rubber battery grip pad included
  • Motor ventilation holes
  • LED rear bumper for 8 programmable LED’s
  • Naze 32 LED indicator window
  • Naze 32 pre-drilled mounting holes
  • CC3D PDB pre-drilled holes
  • Large airflow slots in motor arms
  • Machined channels in arms for motor wires
  • Pre-drilled Top Cover for Fossils Stuff Active Tilt Mechanism (ATM)
  • Central COG with 3S 1.3ah lipo battery

The Top Cover can be easily removed and re-fitted with only 4 M3 screws allowing quick and easy access to the inside.

Specifications:
Material                              HDPE
Weight                               152g
Size                                    250mm PCD
Flight Controller                 Naze 32 Rev 5
Motor Size                         2200 series
Maximum battery size        4S 1.5ah
 
 
The 
Lifetime Frame Warranty* covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part/s. The frames will need to be registered with Fossils Stuff either by email or post for the Warranty to be valid. This warranty is valid for the lifetime of the Mainframe and Top Cover.
Holes may be drilled in Top Cover for VTX antenna and LED wire route at rear of mainframe. No other modifications may be carried out.

 

NOTA: Só o FRAME sem electrónica, as fotos disponibilizadas são meramente ilustrativas.

 

Comentar

Nome:


Comentário: Obs: HTML não suportado!

Avaliação: Mau            Bom

Digite o código exibido na imagem:




       
SkyScan Store © 2018
webdesign by criativo.net